Sensaphone Model 2800 Product Brochure
(Sensaphone Introduces Wireless Sensors)
Now you can monitor critical conditions at remote locations without running wires. Introducing the new Sensaphone 2800 with Wireless Sensor Technology.
Based on proven Sensaphone remote monitoring methods, the 2800 adds the ability to read sensor status from wireless sensors. And not just simple on/off status, or open/closed conditions. The Sensaphone Wireless Technology includes full analog capability so real world values can be monitored, like actual temperatures, real tank levels and flow rates.
You can use up to four of the Sensaphone wireless sensors with the 2800. A variety of wireless sensors types are available to choose from, including ...
- Temperature
- Humidity
- Power Failure
- Motion Detector
- Water on Floor
In addition to the wireless sensors, there are also two Wireless Interface modules. These allow you to connect to existing equipment or sensors and transmit their status back to the 2800 wirelessly. There is a Dry Contact wireless module, and even a 4-20mA wireless module. The 4-20mA wireless module even provides battery backed 24 VDC loop power for your transducer.
Stick It Anywhere!
Most of the Sensaphone Wireless Sensors run on batteries for up to 3 years. You can literally, just stick a sensor to the wall and start monitoring right away. The 2800 will scan, find the sensor, self configure and do most of the work for you. All you need to do is to record a custom voice message and fill in a few parameters.
Self Diagnostics
The Wireless Sensor Network is always being watched by the 2800. In addition to looking for alarms from the sensor values, it is also looking to make sure that each wireless sensor is fully functional and its batteries are full. If there are any problems with the wireless sensors, the 2800 will initiate a diagnostic alarm and notify the appropriate personnel immediately.
·
- Built-in
- Power Failure, Sound Level, Temperature*
-
·
- Inputs
- 4 Wireless & 4 Hard Wired
-
·
- Outputs
- 1 Relay (manual or automatic control)
-
·
- Notifications
- 8 Custom Voice Phone Calls
-
·
- Special Features
- Wireless Sensors
-
** We quote lower than MSRP so please contact us for a quote **
Ordering Information
Sensaphone 2800 Wireless Monitoring System
FGD-2800-CD
MSRP: $1,195.00
Accessories
Accessory Wire
FGD-0010
MSRP: $6.00
ISOTEL Surge Protector
FGD-0023
MSRP: $100.00
External Microphone Attachment
FGD-0057
MSRP: $30.00
J Type Thermocouple/4-20mA Converter
FGD-0220
MSRP: $349.00
AC Power Adaptor for 2800 Wireless Sensors
WSR-0190
MSRP: $15.00
Wireless Repeater
WSR-0199
MSRP: $275.00
Wireless Sensors
Wireless Temperature Sensor
WSR-0100
MSRP: $195.00
Wireless Dry Contact Sensor
WSR-0101
MSRP: $185.00
Wireless Power Failure Sensor
WSR-0102
MSRP: $215.00
Wireless Humidity Sensor
WSR-0103
MSRP: $245.00
Wireless 4-20mA Sensor
WSR-0104
MSRP: $225.00
Wireless Motion Detector
WSR-0105
MSRP: $195.00
Wireless Spot Water Detection Sensor
WSR-0106
MSRP: $195.00
Wireless Zone Water Detection Sensor
WSR-0107
MSRP: $295.00
Hardwired Sensors
Magnetic Reed Switch
FGD-0006
MSRP: $10.00
Infra-Red Motion Detector
FGD-0007
MSRP: $79.00
Spot Water Detector
FGD-0013
MSRP: $90.00
Temp Alert
FGD-0022
MSRP: $65.00
Humidistat
FGD-0027
MSRP: $40.00
Smoke Detector 110VAC
FGD-0049
MSRP: $55.00
Smoke Detector 110VAC with Battery backup
FGD-0049-B
MSRP: $65.00
Humidity 4-20mA Transmitter
FGD-0052
MSRP: $249.00
24VDC Power Supply for FGD-0052
FGD-0053
MSRP: $45.99
PowerOut Alert MODEL PS-110
FGD-0054
MSRP: $59.00
Zone Water Detector
FGD-0056
MSRP: $135.00
Extra 10' Water Detection Rope
FGD-0063
MSRP: $70.00
Remote Temperature Sensor 2.8K
FGD-0100
MSRP: $20.00
2.8K Weatherproof Temperature
FGD-0101
MSRP: $30.00
10K Weatherproof Temperature
FGD-0102
MSRP: $30.00
10K Indoor Decorator Zone
FGD-0103
MSRP: $40.00
10K Outdoor Air Weatherproof
FGD-0104
MSRP: $70.00
10K Immersion Temperature
FGD-0105
MSRP: $60.00
Float Switch
FGD-0222
MSRP: $39.00
| 
